The error the remote device won’t accept the connection is prevalent for Windows 10 users. This error happens when you’re surfing the web with a browser. Maybe you have your IE settings wrongly configured, or you have a proxy gate enabled. But whatever the case may be, it is fixable. Therefore, in this article, I’m going to provide you with troubleshooting tips to conquer this error.
This is a standard error. It occurs when you’re accessing the internet, and you get a message saying that the page cannot be displayed. When you run diagnostics as indicated by your browser, you’ll get the message. The remote device or resource won’t accept the connection. This error is not limited to any particular browser. However, once you see this message on your screen, you need to immediately look for a solution.
What Causes the Error?
Frequently this error occurs when you’re accessing the internet, and you get a message saying that the page cannot be displayed. It also occurs as a result of the following;
a proxy setting has been enabled on Windows 10
issues with your IP configuration
changes made within the Microsoft Edge web browser
your firewall settings are not in order
changes in the default settings of your antivirus program
Nonetheless, whatever the case may be, once you encounter this error, you need to fix it with the steps I detailed within the next section.
How to Fix the Error?
Depending on the source of this error, there are several solutions available for you. You can smoothly perform these solutions by following the step by step processes below.
Solution 1: Disable Proxy Settings
If you’re making use of proxy settings for your work, you’re likely to encounter this error. Proxy settings are usually used by institutions to limit internet access or monitor it. So if you want to fix this error in this scenario, try disabling your proxy server. You can easily disable proxy settings by following the steps below.
Step 1: Press the Windows key + S at the same time. This will launch the search bar of your start, and a dialogue box will appear.
Step 2: Enter “proxy” in the dialogue box and click the first result that comes up.
Step 3: Click on the LAN Settings button. You will find it at the near end of the window.
Step 4: Now, uncheck the “Use a proxy server for your LAN” box and click Ok to save changes.
Step 5: Exit and check if the problem has been fixed.
If the error is not fixed, you need to move down to the next potential solution below.
Solution 2: Reset IE Settings
A lot of people have found this solution to be very useful. When your internet explorer settings are not correctly configured, you’re likely to encounter this error.
In this scenario, your go-to solution should be to reset IE settings. But before you do this, ensure you backup your bookmarks and other settings. Now, to reset internet explorer’s settings, you need to follow the steps below carefully.
- Step 1: Press the Windows key + R simultaneously and type “inetcpl.cpl.” Press Enter when you’re done.
Step 2: In the Internet options, go to the advanced tab and click Reset. You will find it at the near bottom of your screen.Step 3: Now check the “Delete personal settings” option and click on Reset. Your internet explorer will be reset, and all your add-ons will be disabled. Even your home pages will be reset. So, bear this in mind while performing this operation.Step 4: Restart your PC and check if the error has been fixed.If the error is not fixed, you need to move down to the next potential solution below.Solution 3: Disable Antivirus Software, Firewall, and Content Blockers
This is another right way to get rid of this error. Windows Firewall can monitor your internet packets and data. Sometimes it stops some applications or some connections from installation if they don’t meet its criteria. It could be the cause of this error.
Disable any antivirus software and content blockers that are enabled on your computer. To perform this solution, you need to follow the steps below carefully;
Step 1: Press the Windows key + R button at the time. This will bring up the Run application.
Step 2: Open the control panel by typing control panel in the dialogue box.
Step 3: A dialogue box will appear in the top right corner of your screen. Type in firewall and click the first option that comes up.
Step 4: Click the option that says “Turn Windows Firewall on or off.” You will find it on the left side of your screen.
Step 5: Once you’re done, click the option that says “Turn off Windows Firewall” on both the Public and Private Network tabs. Save the changes you made and exit.
Step 6: Restart your PC and check if the error has been fixed.If the error is not fixed, you need to move down to the next potential solution below.
Solution 4: Use Command Prompt
When you try accessing a server in a specific domain, you’re likely to encounter this error. What means is that your remote Connection to the target address has failed. You can solve this by carrying out an elevated command. Just carefully follow these steps;
Step 1: Press Windows key + S simultaneously.
Step 2: Type “command prompt”.
Step 3: Right-click the application and choose Run as administrator.
Step 4: In the elevated command prompt, perform the following instruction:GPUPDATE /FORCE
Step 5: Restart your computer and check if the error is still there.
Conclusion
The error “the remote device won’t accept the connection” is not difficult to fix. Though the process may take time sometimes, the result is always worth it. I have provided you with the solutions to help you fix this error. Now it’s your turn to perform these solutions and conquer it.